1999 CAT 988F II for sale in Fairbanks, AK

FOR RENT OR SALE. PLEASE CALL FOR RENTAL RATES AND DETAILS1999 Caterpillar 988FII S/N 2ZR02021Cab, A/C, HeatApprox 6,000 hours on full power trainAvailable attachments: (Machine comes with 1 bucket, additional buckets or forks available at additional cost) Spade Nose Rock bucket GP with BOE Pin On 6' Forks Ride Control Stic Steering Back up Camera, CB radio Cloth Seat 35x65x 33 Firestone L-5 Tires @ approx 65% remaining High Ambient cooling package Axle oil coolers Arctic Heating Package which includes: 120 VAC Dual Block Heaters, Pad Style Transmission heaters, Pad Style Hydraulic heater, cold weather fluids. Rigid LED Lighting System Components & Major Repairs: 9/10/15 @ 1865 Hrs replaced engine oil cooler 4/20/15 @ 1221 hrs reseal tilt and lift cylinders and replace rods with Cat reman. Replaced pins and bearings on cylinders as well, replace main bucket pins on both B and dog bones4/20/15 @ 1221 Hrs reseal rear flywheel housing, reseal all pumps, reseal converter and install new u joints on converter to engine. Replaced main wiring harness on engine. Hour Meter changed 3/13 @ 22,454 Hours4/28/09 @ 21,490 Hrs new steering control valve 11/5/07 @ 20,563 Hrs Reseal LH Hoist Cylinder 3/1/07 @ 19,112 Hrs replaced LH cylinder head (warranty) 8/8/06 @ 18,050 Hrs RH Tilt Rod Resealed 7/25/06 @ 17,966 Hrs Engine, Transmission, Torque Converter, Implement Pumps, Radiator, Transmission pump, Pilot Valve, Fan Motor, Rear Differential Supports, Control Valves, Rebuilt. 2/24/06 @ 17,158 Hrs Replaced Steering Pins and Bearings 9/08/04 @ 13,884 Reseal Tilt Cylinders 7/14/04 @ 13,491 Hrs Rebuilt Front & Rear Differentials and all 4 axles 2/8/04 @ 12,608 Hrs Rebuilt Loader Linkage complete General Notes: Very solid machine. Was just recently run through our shop prior to last rental and was brought to near perfect condition. Anything that needed attention was taken care of including 2,000 service, any leaks repaired, cab was cleaned up and gone through complete. Hitch, Loader linkage & Oscillation is in very good condition and tight. Unit received complete paint job which included, sand to bare metal, primer and 2 coats of very high quality paint 1800 hrs ago. WE HAVE IN STOCK SEVERAL LARGE CATERPILLAR CRAWLER TRACTORS, MOTOR GRADERS, WHEEL LOADERS, EXCAVATORS & ARTICULATED HAUL TRUCKS LOCATED IN WASHINGTON, ALASKA AND VARIOUS OTHER AREAS IN THE WESTERN US WHICH ARE AVAILABLE FOR RENT. PLEASE CALL FOR RATES WHICH VARY DEPENDING ON LOCATION AND APPLICATION. ALL UNITS IN EXCELLENT WORKING CONDITION & MSHA COMPLIANT.REASONABLE TRANSPORT COST AND ASSEMBLY AVAILABLE. We are not brokers and we own what we advertise. We are a small full service independent used equipment dealer and rental company. We have two shop facility locations to serve our customers, South Prairie, Washington & Fairbanks, Alaska. We focus on the rental and sale of ultra-high quality large track type tractors as well as other Caterpillar equipment models which are custom built in our shops for very remote applications in harsh environments. Full details and pictures are available for all units for sale or rent. Every one of our machines has been through or is scheduled to go through our shop before it is sold or put out on rental. In our shops we repair any problems found during an in depth professional inspection. Our range of shop services varies from bare frame up total machine rebuild to minor repairs, general cleanup, fabrication and custom modifications as we are truly a full service independent dealer. Every machine from GES is performance tested prior to delivery to verify top quality long term operation and performance once on the job. Our customer support and service while on rent or after the sale is unsurpassed. Our business depends on satisfied customers and we understand this completely. Our equipment is expensive because we spend the time and money necessary to professionally bring them to true work ready, high quality condition so you can enjoy high production in harsh and remote environments. Our equipment is truly a viable alternative to new at a fraction of the cost. Your complete and absolute satisfaction is our number one goal. Please remember "The Bitterness of Poor Quality remains long after......the sweetness of low price is forgotten"PLEASE EMAIL OF CALL FOR MORE DETAILSPlease remember "The Bitterness of Poor Quality remains long after......the sweetness of low price is forgotten"PLEASE EMAIL OF CALL FOR MORE DETAILS


Demag AC160-2 -

Demag AC160-2 -

Syracuse, NY
Posted on: October 19
Additional Information Main boom 210' with quick disconnect system, 30'-56' swing-away jib, - Main boom 210' with quick disconnect system - 30'-56' swing-away jib - 52' main boom extension (2x26') - 5 axle crane carrier - Drive & Steer 10x8x8 - 5 sheave block - 1 sheave block - quick disconnect for outriggers - CWT 119,500LB - dolly preparation - air conditioning - rooster sheave + 2nd boom head ...

Demag AC200-1 -

Demag AC200-1 -

Syracuse, NY
Posted on: October 19
Additional Information COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks - Worldwide Engine - 41'-223' Boom - 30'-56' Jib - Single Line Hook - 3 blocks - Telescopic boom HA: 41-223' (12,5m- 67,8m) - rooster sheave - HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree 1-sheaved head, Incl. transport storage - VA16: 8m/16m...

Demag AC250-1 -

Demag AC250-1 -

Syracuse, NY
Posted on: October 19
Additional Information 48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension, - 48'-262' Main Boom - 32'-65' Hydraulic offsettable Jib - 26'-52' Telescopic boom extension - 213,000 lbs of counterweight -125ton-5 sheave hook block - 80 ton- 3 sheave hook block - single line hook - Dolly Preparation, with automatic rigging system - Innovative Demag IC-1 crane con...

Demag AC350-6 -

Demag AC350-6 -

Syracuse, NY
Posted on: October 19
Additional Information 210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system. CRANE CARRIER: - 210' 6 section Main Boom - Drive/Steering 12 x 8 x 10 - automated rear axle steering system - 4 telescopic outriggers with automatic leveling - Automatic centralized lubrication - 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine - ZF AS-Tronic incl...

Demag AC40-1 -

Demag AC40-1 -

Syracuse, NY
Posted on: October 19
Additional Information 3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102' - 3-axle CITY CRANE - Drive & Steer 6x4x6 - Main boom 102' - Boom head traverse cpl.: Searcher hook, incl.shackle and hook - HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7 - Counterweight rigging device - Cast counterweight 3-pieces - Hook bl...

Don't Be a Victim of Fraud

  • Electronic Scams
  • Home-based jobs
  • Fake Rentals
  • Bad Buyers
  • Non-Existent Merchandise
  • Secondhand Items
  • More...

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!

More Listings

1999 ABI TM14/17B
Anchorage, AK
1999 ABI TM14/17B
Anchorage, AK
1999 KENWORTH T800B
Fairbanks, AK
1999 PETERBILT 330
Fairbanks, AK
Dozer Caterpillar D6M from 1999
Anchorage, AK